It simply works! | Sabrent SBT-STDB IDE Ultra ATA-100/133 to Serial ATA Port Mini Converter Adapter

electronics: Sabrent SBT-STDB IDE Ultra ATA-100/133 to Serial ATA Port Mini Converter Adapter

electronics:


	• Sabrent SBT-STDB IDE Ultra ATA-100/133 to Serial ATA Port Mini Converter Adapter SABRENT SABRENT view larger image
	for more information click here

works great

I bought the wrong hard drive for my computer. This handy little device did the trick. If you have any experience at all you should have no problem installing.

It simply works!

just like another reviewer I also bought this when the price was less than $10. There's not a great deal to say about this item: Either it works or it doesn't. For me it did! If you expect documentation with this then perhaps you don't know what this gadget does and should avoid it. Naturally whether it works or not depends on several factors including the device types and brands you are connecting as well as other factors such as firmware/software and even cables that are used. Unfortunately none of the adapters on sale (anywhere) can tell you whether or not a particular converter will work for your particular setup. Take a punt; Try it and see ...

for more information click here

Convert High Capacity SATA Hard Drive and SATA Storage Device to operate with IDE Host Controller! Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ?.)and make them become IDE Device to work with IDE host Controller. This Ultra ATA-To-1 Port Serial ATA Converter is the solution for converting a Serial ATA device. It features a Serial ATA port to connect SATA devices such as hard drives, DVD-ROM,or CD-ROM drives to a Parallel ATA interface. It supports Serial ATA tansfer rate of up to 1.5 GB/s and supports Spread Spectrum Receiver. This Bridge Board is a converter solution for the Serial ATA Device. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed and converted to a prallel ATA protocol and sent to the host. This Bridge board can support HDD larger than 137GB.

for more information click here